Subaru is one of the most popular makes of cars in the United States. They’re known for their strong engines and comfortable seating. But like all things, Subaru cars need maintenance to keep them running smoothly.
Starting with a Subaru maintenance plan is essential to keeping your vehicle running smoothly and predictably. If you want to maintain a Subaru car then visit http://www.lakeviewautomotive.ca/.
Image Source: Google
Here are five things you should do every time you get your Subaru serviced:
1. Change the oil and filter every 3,000 miles.
2. Check all fluid levels and add as necessary.
3. Check tire pressure, rotations, and alignment as needed.
4. Inspect brakes, suspension, and tires for wear or damage.
Here are some tips on how to change your Subaru’s oil yourself:
1. Locate your car’s oil filter. It is usually located on the engine block near the radiator.
2. Open the oil filter cover and remove the filter. Be sure to discard the old filter material in an appropriate receptacle.
3. Verify that your Subaru has a conventional or synthetic oil filter and pour about 1 quart of new engine oil into the engine compartment. Replace the oil filter and tighten its mounting bolts securely by hand.
4. Close the engine compartment cover and start your car. Check for leaks after 10 minutes of driving at low speed or while braking and accelerating heavily.
If your Subaru feels sluggish or has poor handling, it’s likely that the tires are to blame. Replacing your Subaru’s tires is an essential part of proper maintenance, and there are a few simple steps you can take to help ensure a smooth ride.
When replacing your Subaru tires, make sure to get the correct size and type. Your vehicle comes with specific information in the owner’s manual, so don’t forget to check it before getting started. When selecting new tires, be sure to consider your driving habits, terrain, and weather conditions. Remember that new tires offer better fuel efficiency and increased performance.